📏Mesmer Eclipse TS Size Chart
Mesmer Eclipse TS skates are dual-sized — each size (XS–XL) covers a 2-size EU bracket. Measure your foot length in cm (Mondo) and match it to the bracket below. The Shell Length & Width (mm) help match frames and soulplates.
How to measure: Place a sheet of paper against a wall on a hard floor. Stand on it with your heel against the wall and mark the tip of your longest toe. Measure the distance in centimetres — that cm value is your size.
| Size | Foot (cm) | EU | US | UK | Shell L | Shell W |
|---|---|---|---|---|---|---|
| XS | 24.5 – 25.1 | 38 – 39 | 6 – 7 | 5 – 6 | 260mm | 99mm |
| S | 25.8 – 26.4 | 40 – 41 | 7.5 – 8 | 6.5 – 7 | 272mm | 102mm |
| M | 27.1 – 27.8 | 42 – 43 | 9.5 – 10 | 8 – 9 | 285mm | 105mm |
| L | 28.5 – 29.1 | 44 – 45 | 10.5 – 11 | 9.5 – 10 | 299mm | 109mm |
| XL | 29.8 – 30.6 | 46 – 47 | 12 – 13 | 11 – 12 | 314mm | 112mm |
Shared-shell sizing
Each size (XS–XL) covers a 2-size EU bracket. Pick the bracket your measured foot length falls into — the liner takes up the small difference.
Fitting for COMFORT
Pick your bracket, or round up if you’re right between two brackets.
Fitting for PERFORMANCE
Choose the lower bracket for a snug, locked-in aggressive fit.
Shell
Aggressive Mesmer boot — each shell covers a 2-size bracket; the Shell Length & Width (mm) help match frames and soulplates.
Liner
Mesmer liner breaks in and moulds to the foot — expect a snug fit when new.
✓ How it should feel
A snug, supportive wrap with toes just touching or reaching the front. The liner settles to your foot after a few sessions.
✗ How it should NOT feel
Toes curling up, the heel lifting once buckled, or the foot sliding side to side.
Size Chart Disclaimer. This chart reflects measurements supplied by Mesmer. Applies to the Eclipse TS range; ships in XS–XL (EU 38–47). Shell Length and Width are external measurements in mm. We cannot be held responsible for incorrect size purchases — when in doubt, message us before ordering.
Reseñas de Google
